When the conveyor belt is in normal operation, the belt speed is not less than 95% of the roller speed. If the friction between the roller and the conveyor belt is insufficient, the conveyor belt is prone to slippage. As a Fire Resistant Steel Cord Belt Factory, let’s analyze what causes the conveyor belt to slip. There are many reasons for the insufficient friction between the roller and the conveyor belt. Common ones are: insufficient tension, load start, and insufficient friction coefficient on the drum surface.

The reasons for insufficient tension are: insufficient tensioning stroke, insufficient weight of the counterweight, too long conveyor belt, etc.;

The reasons for the insufficient friction coefficient of the roller surface are: the surface of the roller is too much worn, the belt is too wet or sticky, and the surface of the belt is stuck with material (easy to be swelled by water).

Our company also offers the Cold Resistant Conveyor Belt. Welcome to contact us.

The materials conveyed by the steel and cement industries generally have the characteristics of high temperature and high heat. Sometimes the instantaneous temperature can reach 400-500 ° C. At the same time, the distance of material conveying is generally short, the length of the heat-resistant conveyor belt is short, and the cycle time is less. The material impact wear frequency is high, so the Heat Resistant Steel Cord Conveyor Belt is subject to the double test of high temperature and impact wear. As a Fire Resistant Conveyor Belt Wholesaler, we have the following recommendations.

In order to completely solve the above problems and achieve the durable use of heat-resistant tape products, through the in-depth study of the different wear and damage forms of the existing Heat Resistant Steel Cord Conveyor Belt, a new structure of wear-resistant heat-resistant conveyor belt can be developed, which can reduce The belt wear level increases the life cycle of the product.

The structure of the Heat Resistant Steel Cord Conveyor Belt consists of a top and bottom cover layer and a low-contraction canvas core layer. The upper and lower rubber faces are made of a peroxide-cured system. The rubber material is manufactured, and a layer of nylon or steel mesh cloth with high elongation property is laid in the rubberized surface, which can play the role of dispersing the material impact stress, reducing the impact wear on the cover rubber, and ensuring the overall strength of the belt.

When the Metallurgy Conveyor Belt is in normal operation, the belt speed is not less than 95% of the roller speed. If the friction between the roller and the conveyor belt is insufficient, the conveyor belt is prone to slippage. There are many reasons for the insufficient friction between the roller and the conveyor belt. Common ones are: insufficient tension, load start, and insufficient friction coefficient on the surface of the roller.

The reasons for insufficient tension are: insufficient tensioning stroke, insufficient weight of the counterweight, too long conveyor belt, etc.;

The reasons for the insufficient friction coefficient of the roller surface are: the surface of the roller is too much worn, the belt is too wet or sticky, and the surface of the belt is stuck with material (easy to be swelled by water).

We are the Nn Conveyor Belt Expoter. If you have any questions you would like to know, you can contact us directly and we will give you a professional solution based on the problems you have described.

Specific use of Conveyor Belts:

1. Prevent the Rubber Conveyor Belts from starting up.

2. When the conveyor belt runs off, measures should be taken to correct it in time.

3. Conveyor belts of different types and specifications should not be used together, and the joints are preferably glued.

4. The type, structure, specification and number of layers of the conveyor belt should be reasonably selected according to the conditions of use.

5, the conveyor belt running speed is generally not more than 2.5m / s, block size, large abrasive materials and the use of fixed pear discharge device should try to use low speed.

6. The relationship between the diameter of the drive roller of the roller conveyor and the layer of the conveyor belt, the matching of the drive roller, the reversing roller and the groove angle of the roller should be reasonably selected according to the design regulations of the conveyor.

7. The feeding direction should be in the running direction of the conveyor belt. In order to reduce the impact on the conveyor belt when the material falls, the chute should be adopted to reduce the material drop distance; the conveyor belt receiving section should shorten the idler spacing and use the buffer roller. In order to leak the material, the conveyor belt adopts a soft and moderate baffle plate to prevent the baffle plate from being too hard and scraping the belt surface of the conveyor belt.

8. When the conveyor is in use, if there is no roller, it should be added and repaired in time; the roller is covered by the material, causing the rotation to be ineffective, preventing the leakage from getting stuck between the roller and the tape, paying attention to the lubrication of the movable part of the conveyor belt. But not oily conveyor belts.

9. Avoid the Fire Resistant Conveyor Belt from the blockage of the rack, pillar or block material to prevent breakage and tearing. When the conveyor belt is partially damaged, the artificial cotton should be repaired in time to avoid expansion.

As a Steel Cord Conveyor Belt Factory, we continue to teach you how to identify the advantages and disadvantages of conveyor belts.

Seen from the quality of the belt

Pressure bearing:

Since it is necessary to transport large quantities of material products, it is naturally stronger in terms of relevant pressure bearing capacity, otherwise, it is difficult to meet the relevant production needs.

Heat resistance:

In many industrial processing steps, we need to cool or heat the raw materials or semi-finished products. If the conveyor belt used does not have good high-temperature resistance, then in practical applications, it is naturally impossible to We bring relevant production assistance.

Corrosion resistance:

Since it is to be used for the cooling or heat treatment of raw materials, for some chemical industry production activities, it will inevitably involve a lot of processing of products with certain corrosiveness, so the conveyor belt must also have good Corrosion resistance so that we can better use it for us.

If you would like to know more about PVG Conveyor Belt, please visit our website or contact us.

There is no shortage of seeing the delivery process of some goods in life, and the use of conveyor belts will not be rare. For some manufacturing companies or the logistics and transportation industry, choosing a good conveyor belt can bring many unexpected conveniences and safety to the enterprise. As a Steel Cord Conveyor Belt Factory, we have the following recommendations.

Before making a choice, you first need to have a comprehensive understanding of the actual transportation situation of the company. The assessment is based on the method, quantity, size, etc. of the items to be transported. Then, according to the actual situation, a suitable conveyor belt is selected. When selecting, it is necessary to ensure the integrity of the integrity of the conveyor belt body, so that there will be no jamming or breakage during use.

Our company offers the Sidewall Conveyor Belt. Welcome to contact us.

As a Solid Woven Conveyor Belt Supplier, let us explain why conveyor belt joints are easy to crack.The strength of the joint of the conveyor belt is lower than the normal strength. Since the strength of the joint is relatively low, if the bonding method is not correct, the strength of the joint will be lower, such as when the knife is opened, the next layer of cloth is damaged, the length of the overlap is insufficient, the grinding is excessive, the number of steps is insufficient, and the joint is glued. The rubber used has poor performance or has failed from sulfur, and the strength of the joint portion will be greatly reduced. When used, the joint portion is likely to be broken. In addition, if the conveyor belt does not use the sealing glue, or the direction of the glue joint is wrong, the joint portion is prone to cracking.

Our company offers the Sidewall Conveyor Belt. Welcome to contact us.

On April 30th, on the occasion of the May 1st International Labor Day, in order to further implement the concept of “happy work, healthy peers”, further enrich the spiritual life of employees and promote the healthy development of the company, as a Steel Cord Conveyor Belt Factory, Huayue Company held a fun games for employees.

Taking this opportunity, we also provide a stage for demonstrating the vitality and style of our employees and demonstrating the spirit of teamwork. The competition is divided into participation, fun and competition. A total of 7 competitions have been set up.

The athletes participating in the competition are divided into 6 teams. In the arena, regardless of age and level, they always strive to be the first, strive for the first, and add a lot of laughter and laughter in the intense game. Through this activity, both the spirit of unity and cooperation and the sense of collective honor have been enhanced, and the spirit of Huayue people’s active participation, dedication, friendship and mutual assistance has been demonstrated.

When the conveyor belt is in normal operation, the belt speed is not less than 95% of the roller speed. If the friction between the roller and the conveyor belt is insufficient, the conveyor belt is prone to slippage. As a Fire Resistant Steel Cord Belt Factory, let’s analyze what causes the conveyor belt to slip. There are many reasons for the insufficient friction between the roller and the conveyor belt. Common ones are: insufficient tension, load start, and insufficient friction coefficient on the drum surface.

The reasons for insufficient tension are: insufficient tensioning stroke, insufficient weight of the counterweight, too long conveyor belt, etc.;

The reasons for the insufficient friction coefficient of the roller surface are: the surface of the roller is too much worn, the belt is too wet or sticky, and the surface of the belt is stuck with material (easy to be swelled by water).

Our company also offers the Cold Resistant Conveyor Belt. Welcome to contact us.

As a Fire Resistant Steel Cord Belt Factory, let’s talk about the reasons for the use of the Fire Resistant Steel Cord Belt.

The main reason for the peeling of the Fire Resistant Steel Cord Belt is that the adhesion and strength between the cover layer and the core are low, and the main reasons for the low adhesion between the two are as follows:

1. After the core paste is plasticized, it is stuck with dirt when it is redirected.

2. Core paste overmolding can not be a good combination with batter.

3. The precipitation of plasticizer in the core paste reduces the bond strength between the core faces.

Our company offers the Fire Resistant Steel Cord Belt. Welcome to contact us.