Baoding Huayue recently participated in tax training. As a Nylon Conveyor Belt Factory, we are also focusing on the cultivation of talents while improving the knowledge of professional industry products.

Baoding Huayue is not only a leader in the Coal Mine Steel Cord Conveyor Belt, but also a leader in the company’s strength and talent development. We look forward to cooperating with more friends. Welcome to contact us.

• TEL : +86 312 391 2064
• FAX : +86 312 588 8080
• E-MAIL : overseas@hbhuayue.com
• WEBSITE : www.hyconveyorbelt.com 
  www.hbhuayue.com

The repair of the ordinary conveyor belt is very different from the repair of the steel wire conveyor belt, mainly because the structure of the two is different, and the repairing process is different. As a PVG Conveyor Belt Manufacturer, let’s talk about the repair of ordinary conveyor belts;

1. Ordinary conveying requires two kinds of cases to be cemented. One of them is damaged. The belt can not be used normally due to long use time or failure; the second is the new belt with normal cementation. If the belt is damaged, replace it with a new one and there is no need to repair it.

2. Repair method: can be cold sticky or hot sticky (and vulcanized)

This article does not discuss the problem of cold sticking, because the steps are basically the same as the vulcanization, but only whether or not the vulcanizer is used.

In addition, if the belt is damaged, it is recommended to disconnect the vulcanization interface to ensure normal production.

Our company also produces PVG Conveyor Belt, Fire Resistant Steel Cord Belt. If you need it, please feel free to contact us.

The materials conveyed by the steel and cement industries generally have the characteristics of high temperature and high heat. Sometimes the instantaneous temperature can reach 400-500 ° C. At the same time, the distance of material conveying is generally short, the length of the heat-resistant conveyor belt is short, and the cycle time is less. The material impact wear frequency is high, so the Heat Resistant Steel Cord Conveyor Belt is subject to the double test of high temperature and impact wear. As a Fire Resistant Conveyor Belt Wholesaler, we have the following recommendations.

In order to completely solve the above problems and achieve the durable use of heat-resistant tape products, through the in-depth study of the different wear and damage forms of the existing Heat Resistant Steel Cord Conveyor Belt, a new structure of wear-resistant heat-resistant conveyor belt can be developed, which can reduce The belt wear level increases the life cycle of the product.

The structure of the Heat Resistant Steel Cord Conveyor Belt consists of a top and bottom cover layer and a low-contraction canvas core layer. The upper and lower rubber faces are made of a peroxide-cured system. The rubber material is manufactured, and a layer of nylon or steel mesh cloth with high elongation property is laid in the rubberized surface, which can play the role of dispersing the material impact stress, reducing the impact wear on the cover rubber, and ensuring the overall strength of the belt.

There are many types of conveyor belts, but different considerations during storage and placement. As an Acid-alkali Resistant Conveyor Belt Supplier, let us explain the storage requirements of the Acid-alkali Resistant Conveyor Belt.

The acid and alkali resistant conveyor belt should be protected from contact with acids, alkalis, oils, organic solvents, etc. during transportation and storage, and kept clean and protected from direct sunlight or rain and snow, and one meter away from the heating device. During storage, the conveyor belt shall be placed in rolls and shall not be folded. It shall be turned once every season during storage. The temperature of the storage warehouse should be kept between 18-40 °C and the relative humidity should be kept between 50-80%.

Let me talk about the features and advantages of the Acid-alkali Resistant Conveyor Belt.

The acid and alkali resistant conveyor belt is made of cotton canvas, nylon canvas or polyester canvas as the core, the belt body has good elasticity, the groove forming performance is good, and the elongation is small. The cover rubber made of acid and alkali resistant materials has good chemical corrosion resistance and good physical properties, and is suitable for working environment in contact with acid and alkali, such as the manufacture of phosphate fertilizer.

As a Fabric Conveyor Belt Manufacturer , let’s talk about why the Heat Resistant Conveyor Belt is bent and its solution.

The Heat Resistant Conveyor Belt has a tortuous curve. The cause of the tortuousness is due to the cause of the equipment, and there are also operational reasons. It is important to accurately analyze the cause of the occurrence. When the tortuosity occurs, first check whether the three holders of the flat vulcanizer are in a straight line. In particular, it is necessary for the nylon core and the E core to have a secondary cold setting. If the clamping viewpoint of the primary stretching and the secondary cold stretching is not 90 degrees, a bending band is often formed. Therefore, the operator may have a misalignment when stretching, or the gripper may have a loose side and may form a bent band. In addition, the thickness difference of the strip blank is missed, and the thick side is thin, and the thick side is vulcanized. The tightening is slightly longer than the thin side. When each board is piled up, the strip is thick and the side is short, and the thin side is short. , thus forming a twist. When the raw tape is vulcanized, if it is placed in the mold frame, it may be deflected, and there may be a bent band.

Solution:

1. As far as possible, the forming process should be staggered by the side of the canvas with the edge of the cloth. The side by side should be elastic and the raw belt should not be thin and thick.

2. When vulcanizing, the raw belt should be squared and cannot be deflected.

3. Always check the operating point of the three grippers in the front, middle and rear, and whether the hydraulic pressure of the clamping is common, is there a loose side and a tight appearance.

4. Timing the plate to reduce the error.

Huayue offers a variety of industrial conveyor belts such as PVG Conveyor Belt , Fire Resistant Steel Cord Belt and EP Nylon Conveyor Belt. Welcome everyone to come to consult and order.

As a Fire Resistant Steel Cord Belt Factory, we use the Fire Resistant Steel Cord Belt as an example to introduce the mining belt to prevent damage. These precautions include:

1. Replace the unloading hoppers of all coal feeder discharge ports and tilt them at a certain angle. Add cushioning parts to the lower part of the coal feeder. The large coal gangue is no longer directly on the conveyor belt, reducing its impact on the conveyor belt.

2. Extend all the coal guiding point guide trough and the conveyor belt leather, and add a 3~5m net type guide net. After the large coal shovel falls, it will be blocked by the net to move forward along the running direction of the conveyor belt. Do not get stuck or fall between the roller frame and the return conveyor belt.

3. Weld several reinforcing brackets on the roller frame, and each welding joint uses repair welding to increase the strength of the roller frame; add a hook shackle above the notch of the mounting roller to fix the roller so that the roller will not be Your majesty.

4. Increase the density of the roller frame at the lowest point of the roadway where all the belt conveyors are placed, that is, add 2 roller frames between each roller frame to reduce the span of the roller frame and conveyor belt transportation. The coal gang does not hang down in the overhead of the roller through the low shovel.

5. Make 4 U-rings, fix the 4 corners of the tensioning trolley on the rails, prevent them from jumping up and down and swinging left and right to avoid the lanes, but do not hinder the movement of the front and rear, which does not affect the adjustment of the conveyor belt according to the working conditions. Tightening does not affect the normal operation of the tensioning device.

6. Strengthen the daily maintenance and maintenance of the conveyor safety protection device to ensure that the various protection devices are sensitive and reliable, so that the belt conveyor will not operate in an unprotected state for a long time.

Through the above rectification, the probability of damage to the conveyor belt can be reduced from 56.4% to 13.1%, which greatly improves the transportation efficiency.

Our company produces a variety of Metallurgy Conveyor Belts, PVG Conveyor Belts and Customized Chevron Conveyor Belts. Welcome everyone to come to consult and order.

Fire Resistant Steel Cord Beltplays an important role in the production of many enterprises, and even the key links in production. In the process of using the conveyor belt, it is inevitable that there will be wear and other conditions, which will affect the normal operation of the enterprise. From this point of view, the maintenance work of the conveyor belt is very important. As a Fire Resistant Steel Cord Belt Factory, Huayue will tell you about the fireproof wire rope conveyor belt. How to carry out maintenance.

1. The conveyor belt should be kept clean during transportation and storage, avoid direct sunlight or rain and snow immersion, and prevent contact with organic solvents such as acid and alkali oil, and 1 meter away from the heating device.

2. The temperature in the warehouse should be kept between -18-40 degrees during storage, and the relative humidity should be kept between 50-80%.

3. During storage, the product must be placed in rolls, not folded, and should be flipped once every quarter.

4. Conveyor belts of different types and specifications should not be used together, and the joints are preferably glued.

5. The type, structure and number of layers of the conveyor belt should be reasonably selected according to the conditions of use.

6. The running speed of the conveyor belt should not exceed 2.5 m/s. The material with large block size and large wear should use the fixed force type unloading device, and the low speed should be used as much as possible.

7. The relationship between the diameter of the transmission drum of the conveyor and the belt layer of the conveyor belt, the matching of the transmission drum, the reversing drum and the bracket angle should be reasonably selected according to the design regulations of the conveyor.

8. The feeding direction should conform to the running direction of the tape. In order to reduce the impact on the tape when the material falls, the chute should be used to reduce the falling distance of the material; the receiving section of the tape should shorten the spacing of the idler and use the buffer roller to prevent leakage. Material, the belt side should use a soft and moderate baffle plate, so as to avoid the baffle plate is too hard, scratching the belt surface of the conveyor belt.

When we use the EP Nylon Conveyor Belt, most of them consider the safety of the conveyor belt and the working efficiency of the conveyor belt, but there is not much research on the service life of the conveyor belt. In fact, extending the service life of the conveyor belt is a way to effectively reduce the production cost of the enterprise, and at the same time extend the service life of the conveyor belt. It does not require everyone to spend too much energy and time, so it is worth everyone to try.

In order to extend the service life of the conveyor belt, the first thing is to be able to correctly grasp the use method of the conveyor belt when using the conveyor belt, and at the same time not to overload the conveyor belt, the model produced by the conveyor belt manufacturer is subdivided into many Classes are meant to allow everyone to choose the most appropriate category, so everyone needs to pay more attention when choosing a conveyor belt.

When using conveyor belts, pay attention to the maintenance of Rubber Conveyor Belts. Many companies will increase the production volume and let the machine run 24 hours a day. This way, the damage to the conveyor belt is very large, and at the same time At the same time, it does not pay much attention to the maintenance work of the conveyor belt. The service life of the conveyor belt will naturally be greatly affected. Therefore, we must pay attention to ensure that the conveyor has a suitable storage environment, and pay attention to the lubrication of the running parts of the conveyor. Only by ensuring the normal lubrication of the rotating parts of the conveyor can the service life be effectively extended.

The Acid-alkali Resistant Conveyor Belt also requires regular maintenance work in normal use. Due to the influence of production technology, the acid and alkali resistant conveyor belt can not be used in direct sunlight, but also to prevent contact with acid and alkaline substances. Once improperly handled, the conveyor belt will be damaged, which will affect its stability and normality. run. Since the acid and alkali resistant conveyor belt is sensitive in a high temperature environment, in daily use, it is necessary to pay attention to keep away from the heat source for more than one meter, in order to effectively avoid the high temperature damage to the acid and alkali resistant conveyor belt. The following Rubber Conveyor Belts Manufacturer will share with you how to maintain the acid and alkali resistant conveyor belt.

The storage method of the acid-resistant conveyor belt is particularly important. Pay attention to the surrounding environment and the temperature of the surrounding environment during storage. The temperature is preferably maintained at 18 to 40 degrees to effectively increase the storage time of the acid-resistant conveyor belt. At the same time, we must pay attention to the adjustment of humidity. The humidity is preferably controlled within the range of 50%~70%, which can effectively achieve the storage conditions of the acid-resistant conveyor belt.

For different types of acid-resistant conveyor belts, they need to be stored separately, and they cannot be folded when placed. If they are stored for a long time, they need to be flipped regularly. The maintenance and storage of acid and alkali conveyor belts requires a lot of small skills. Only by mastering these tips can the storage time of acid and alkali conveyor belts be greatly increased to ensure the stability and use of acid and alkali conveyor belts. life. Reduce the cost of using acid and alkali resistant conveyor belts at a lower maintenance and storage cost.

When the Metallurgy Conveyor Belt is in normal operation, the belt speed is not less than 95% of the roller speed. If the friction between the roller and the conveyor belt is insufficient, the conveyor belt is prone to slippage. There are many reasons for the insufficient friction between the roller and the conveyor belt. Common ones are: insufficient tension, load start, and insufficient friction coefficient on the surface of the roller.

The reasons for insufficient tension are: insufficient tensioning stroke, insufficient weight of the counterweight, too long conveyor belt, etc.;

The reasons for the insufficient friction coefficient of the roller surface are: the surface of the roller is too much worn, the belt is too wet or sticky, and the surface of the belt is stuck with material (easy to be swelled by water).

We are the Nn Conveyor Belt Expoter. If you have any questions you would like to know, you can contact us directly and we will give you a professional solution based on the problems you have described.