As a Steel Cord Conveyor Belt Factory, we continue to teach you how to identify the advantages and disadvantages of conveyor belts.

Seen from the quality of the belt

Pressure bearing:

Since it is necessary to transport large quantities of material products, it is naturally stronger in terms of relevant pressure bearing capacity, otherwise, it is difficult to meet the relevant production needs.

Heat resistance:

In many industrial processing steps, we need to cool or heat the raw materials or semi-finished products. If the conveyor belt used does not have good high-temperature resistance, then in practical applications, it is naturally impossible to We bring relevant production assistance.

Corrosion resistance:

Since it is to be used for the cooling or heat treatment of raw materials, for some chemical industry production activities, it will inevitably involve a lot of processing of products with certain corrosiveness, so the conveyor belt must also have good Corrosion resistance so that we can better use it for us.

If you would like to know more about PVG Conveyor Belt, please visit our website or contact us.

Conveyor Belts will cause friction with buffer rollers, belt conveyors, raw material ports, etc. during application. The greater the sliding friction, the greater the damage to the conveyor belt. In order to reduce the damage of the conveyor belt, it is necessary to understand the key friction position of the conveyor belt. The Fabric Conveyor Belt Manufacturer below details the key friction positions of the conveyor belt.

Conveyor Belts

1. The friction between the sound card frame and the conveyor belt will cause the conveyor belt to deviate due to the defects caused by the manufacture, installation, and application of the belt conveyor. When the direction deviates too much, the conveyor belt and the roller The brackets and sound card racks are touched and the side glue is damaged or even the conveyor belt is reversed.

2. The friction between the partition of the guide trough and the conveyor belt, and the damage of the partition to the conveyor belt is a unique damage. If the design method of the partition is improved and maintenance is paid attention to, this type of damage can basically be avoided.

3. The friction between the buffer roller and the conveyor belt, the lower covering rubber of the conveyor belt will also suffer from the friction of the self-aligning buffer roller and its protruding trough-shaped buffer roller, and in the transition section from the trough-shaped buffer roller to the drum The bent protrusions of the belt conveyor are all caused by damage.

4. The friction between the mining machine and the conveyor belt and the damage caused by the mining machine to the conveyor belt are generally symmetrical. However, when a harder thick steel plate is used as a cleaning plate, if the operation method is not good, the waste will be removed. The vulcanized rubber outside is drilled out, and when the dirt between the tip of the miner and the conveyor belt enters, it will continue to draw deep scars on the overall length of the conveyor belt.

The above is the location where the conveyor belt is often damaged in the application. In the installation and application, we must try to avoid friction at this location to increase the service life of the conveyor belt. Conveyor belt non-destructive testing and diagnosis technology has already been perfect in the production and processing of paper pulp products. The conveyor belt itself has many advantages and should receive a lot of attention in the future. Traditional inspection methods, machinery and equipment have a high degree of difficulty in actual operation. Some instruments and equipment cannot be used in industrial production and become a driving method to improve the overall quality of the company. As a reasonable inspection method, more and more Used in the production and processing of paper pulp products.

Our company also has Heat Resistant Steel Cord Conveyor Belt on sale, welcome to contact us.

As a PVC Conveyor Belt Factory, share with you. Conveyor belt along the grain is very harmful to the conveyor belt, not only will harm the appearance quality, the most important thing is the life of the conveyor belt, so it is extremely important to prepare in advance to prevent it, so how to avoid the conveyor belt from causing the along the grain?

PVC Conveyor Belt

There are four reasonable countermeasures to prevent the conveyor belt from causing the following lines:

1. The frame characteristics of textiles are the root of the characteristics of decision-making belts. At this stage, the weft shrinkage and stretch of NN and EP textiles used for belts are too large, which is the direct cause of the weave. Reducing the zonal extension, that is, raising the belt characteristics is an important way to control costs.

2. Narrowing the core during the strip forming process can prevent the formation of the parallel grain.

Third, the relevant elements that cause the transformation of the along the grain cannot be ignored.

Fourth, the heat shrinkable film of textiles is not caused by the appearance of the line, it is only the general characteristics of chemical fiber textiles.

When the belt conveyor is in the original factory, the conveyor belt has undergone debugging and adjustment, and it is generally not easy to encounter the problem of deviation in direction in application. However, due to various reasons, the deviation of the conveyor belt direction is also a common problem in the application. Here is a brief analysis of its causes and removal methods:

1. The conveyor belt is stretched and must be tightened.

2. The two sides of the conveyor belt are not tightened and are not leveled, and must be calibrated again. Note that when calibrating, only start the light-emitting conveyor belt and immediately observe the actual effect of the adjustment, to avoid the belt side being squeezed on the sound card rack, destroying the belt edge and the belt jam. If it is really stuck, you have to loosen all the tightening and pull the manual service to the middle part.

3. The conveyor belt must be disassembled and replaced if it does not loosen or fall off the card. Equipment, this kind of sporadic spare parts are presented completely free for life.

4. The side support frame of the V-shaped buffer roller is moved by accidental collision and must be calibrated again. If a belt conveyor with a support frame is used, there is no such thing, but the support frame cannot adjust the deviation of the conveyor belt.

5. The sound card rack is subject to severe impact and deformation. This common fault is not easy to occur, once it occurs, the overall conveyor belt must be adjusted again.

6. The conveyor belt is seriously damaged and must be replaced.

Our company also has PVC Conveyor Belt on sale, welcome to contact us.

During the whole process of using Conveyor Belts, there will be aging of the vulcanized rubber on the conveyor belt, which will cause the conveyor belt to aging. There are many reasons for the aging of the conveyor belt. Today, Rubber Belt Manufacturer will tell everyone.

1. Oxygen: Oxygen is reflected in the molecular structure of the vulcanized rubber in the vulcanized rubber to produce a mineral acid-based chain lock. The molecular structure chain is broken or excessively chemically cross-linked, resulting in changes in the characteristics of the vulcanized rubber. Chemical action is one of the key reasons for the aging of vulcanized rubber.

2. Activated oxygen: The organic chemical specificity of activated oxygen is much higher than that of oxygen, and it is more destructive. It also breaks the molecular structure chain, but the effect of activated oxygen on vulcanized rubber varies with the deformation of vulcanized rubber. As a vulcanized rubber used for deformation (mainly unsaturated fat vulcanized rubber), a crack perpendicular to the direction of in-situ stress appears, that is to say, “active oxygen cracking”; when used for deformation of vulcanized rubber, only the surface layer is converted into an air oxide Without cracking.

3. Heat: Raising the temperature can cause catalytic cracking or thermochemical crosslinking of the vulcanized rubber. But the basic effect of heat is still active. It improves the rate of oxygen external diffusion and active redox reaction, and then accelerates the rate of redox reaction of vulcanized rubber. It is a kind of aging condition of common phenomenon-thermal oxygen aging.

4. Light: The less microwaves, the greater the kinetic energy. It is ultraviolet light with high kinetic energy that can destroy the vulcanized rubber. In addition to ultraviolet light, the molecular structure chain of the vulcanized rubber can be immediately broken and chemically cross-linked. The vulcanized rubber causes mineral acid groups due to digestion and absorption of concentrated light to cause and accelerate the entire process of air oxidation chain reaction. Ultraviolet light plays the role of heating. Another characteristic of the light effect (unlike the heat effect) is that it is crucial to the surface of the oak. For specimens with a high glue content, cracks in the network structure will appear on both sides, which means that the “light surface cracks” are white.

Heat Resistant Conveyor Belts

We know that Heat Resistant Conveyor Belts machinery and equipment must pay attention to maintenance and maintenance in ordinary applications. Normal maintenance and maintenance is the most basic work in the whole process of machinery and equipment operation, not only to formulate normative rules and regulations, regular execution Quantitatively analyze the maintenance of machinery and equipment, and check the maintenance level and the total cost of maintenance raw materials, and regularly assess the progress of technical professional maintenance workers. Carrying out on-time maintenance and maintenance of the conveying machinery and equipment can prevent accidents before they happen, avoid big common faults, and endanger all normal production and manufacturing operations.

The heat-resistant conveyor belt is necessary for the entire process of the transportation of all the media, and this key effect is fully utilized in the application. The conveyor machinery and equipment are equipped with belt conveyors and buffer roller products to carry out the application. Fully exerting a relatively large effect, it is very suitable for subtropical resistance to be used in media mines, but other conveying machinery and equipment cannot, but he has some advantages and effects. Fabric Conveyor Belt Manufacturer will give a detailed introduction to everyone.

Nylon Conveyor Belt

The freight volume of the heat-resistant conveyor belt is relatively large, and it can be made into a ring-shaped or large-angle inclined conveyor belt using various raw materials. The application is relatively stable, and it is generally used in mines. In the natural environment such as mining and transportation of cement clinker. It can have the effect of heat resistance, which is helpful for transporting various goods.

The heat-resistant conveyor belt also has certain advantages. Let’s take a comprehensive introduction below.

1. The advantages of heat-resistant conveyor belts are high efficiency and low loss. It can transport a variety of raw materials, mainly used in the metallurgical industry, cement clinker, etc., the temperature does not exceed 800 ℃, which is well received by everyone Warm welcome.

With the popularization of conveyor belts in industrial production, various types, excellent performance, light weight, intelligence, and long life are good aspects that manufacturers care about. In industrial production, the proper application of conveyor belts seems to be especially critical. The application of conveyor belts should pay attention to the following matters:

1. Prevent the buffer roller from being covered by the raw materials, causing insensitive rotation, avoiding the overflow material caught between the drum and the tape, pay attention to the moistening of part of the conveyor belt theme activities, but not the oily conveyor belt;

2. Avoid starting of conveyor belt load;

3. The direction of deviation of the conveyor belt should be corrected immediately;

4. When it is found that the conveyor belt is partially damaged, use artificial cotton fabric to immediately repair it to prevent expansion;

5. Prevent the conveyor belt from being obstructed by the sound card frame, support or small pieces of raw materials, and avoid scratching and tearing.

Our company also sells Nylon Conveyor Belt, please contact us.

EP Nylon Rubber Conveyor Belt

We supply nylon rubber conveyor belts, and the Huayue conveyor rubber belting supply can be delivery on time, and our conveyor belt material is rubber, nylon, fabric, steel cord, and so on. And because we are rubber belting factory & company , we can supply you rubber conveyor belt price at Ex-factory price, and typs of rubber conveyor belts can be supply as follow, classify from specifications, materials, industrial applications, etc. Conveyor belts is a composite product of rubber, fiber and metal, or a composite product of plastic and fabric, which is used to carry and transport materials in the belt conveyor belt. Conveyor belts are widely used in cement, coking, metallurgy, chemical industry, steel and other industries where the conveying distance is short and the conveying capacity is small. Belt conveyor is widely used in agriculture, industrial and mining enterprises and transportation industry to transport all kinds of solid block and powder like materials or finished articles. The conveyor belt can be transported continuously, efficiently and with a large angle. The conveyor belt is safe to operate, easy to use, easy to maintain and low in freight. It can shorten the transportation distance, reduce the project cost and save manpower and material resources. And our company of rubber conveyor belts is replacement conveyor belt, recycled rubber conveyor belts.

Applications of China EP Nylon Rubber Conveyor Belt

EP/nylon conveyor belt is suitable for transporting lump, granular, powdery materials of normal temperature, non-corrosion in general conditions. It is widely used in metallurgy, construction materials, wharf, mining industries.

When applying Conveyor Belts, it is necessary to consider the application of maintaining the conveyor belt from multiple aspects, so that it can be used for manufacturing as soon as possible. Mine anti-conveyor belts are based on the basic principles of friction transmission system for fitness exercise, suitable for transportation of apparent density less than 1.67/ton/cubic, easy to extract powder, granules, small pieces of low-grinding raw materials and bags Raw materials, such as coal, gravel, sand, concrete, organic fertilizer, grain, etc. The large inclination angle conveyor belt has a large inclination angle and a wave-shaped barrier is composed of a baseband chip, a barrier, and a part of the transverse partition 3. The ribs prevent the raw materials from slipping and falling. Whether it is transportation or installation, it is necessary to pay attention to the appropriate way of application, so that the application cycle time of the conveyor belt can be further improved. Today, everyone will talk about the common types of conveyor belt installation shortcomings. In addition, Nylon Conveyor Belt Factory has shown reasonable for everyone s solution.

EP Nylon Conveyor Belt

Three major problems that must be paid attention to when installing the conveyor belt:

1. The installation length of the conveyor belt is not suitable

Regardless of whether the installation of new belts or the replacement of old belts, if there is no careful overall planning (design or major projects) for the installation of the belt conveyor, it is very easy to cause the conveyor belt to be connected. Immediately The adverse effect is that the position of the balance block is low. After running for two or three months, the balance block relaxes and collides with the road surface when starting. This is because the plastic deformation and elastic deformation of the conveyor belt are not fully considered during the entire installation process.

The conveyor belt is not suitable for installation too short, it should be a certain capacity for subsequent maintenance. Mine anti-conveyor belts are based on the basic principles of friction transmission system for fitness exercise, suitable for transportation of apparent density less than 1.67/ton/cubic, easy to extract powder, granules, small pieces of low-grinding raw materials and bags Raw materials, such as coal, gravel, sand, concrete, organic fertilizer, grain, etc. If the length of the foundation is at the minimum of the spiral tightening. After applying for a period of time, the connector has problems, the conveyor belt capacity is insufficient, the connector cannot be revised, and only the new belt can be reinstalled. That made everyone’s conveyor belt cause white consumption. In addition, the enterprise suffers a certain amount of unnecessary damage. It is a situation that everyone does not want to see in manufacturing.

The ideal installation condition of the conveyor belt is the difference between the length of the conveyor belt and the moderate damage to the moisture content of the conveyor belt. It is best to be able to pre-bunch the capacity of a connector.

Our company also has EP Nylon Conveyor Belt for sale, please contact us.

As a Nylon Conveyor Belt Factory, share with you. Nylon conveyor belt is a kind of conveyor belt, which is very suitable for long-distance transportation. And nylon conveyor belt has the characteristics of thin belt, high strength, high impact resistance, good groove formation, and large virtual beam adhesion. It is widely used in mining, coal plants, chemical plants, metallurgical industry, engineering construction, seaports, etc. unit. But what problems should Nylon Conveyor Belt pay attention to in its operation?

EP Nylon Conveyor Belt

1. When the temperature sensor or temperature sensor drops, or when the belt conveyor is running and the vibration and noise are found abnormal; the nylon conveyor belt should be shut down immediately for maintenance.

2. When some buffer rollers are not properly installed for long-term direction deviation, even if they are not applied, the digging working surface will slowly decrease, and finally they cannot be put into use, or even shorter than the working hours of the continuous running nylon conveyor belt. Destruction within time. Therefore, the nylon conveyor belt cannot be opened and stopped too often, otherwise it will endanger the service life of the goods.

3. When the nylon conveyor belt is terminated, the raw materials of the conveyor belt should be immediately unloaded. At this time, restarting immediately will cause the load of the commodity to be too heavy and bear excessive shock; in addition, the conveyor belt will be damaged if it is opened and stopped too often. Take on the parts with weak impact work ability, and cause the destruction of all belt conveyors.

4. After shutdown, the motor cannot be restarted until the motor is completely terminated.

5. Check the electric roller and disconnect the switch power supply.

6. When the nylon conveyor belt is in operation, do not wash objects, swim or drain livestock, to prevent safety accidents when the motor is powered.

Nylon conveyor belt, in which the white canvas is polyester polyester canvas. Polyester (NN) conveyor belt has the characteristics of thin belt body, high super strength, impact resistance, good groove formation, large virtual beam adhesion, excellent flexibility and long service life, suitable for medium and long distances, high load capacity, Transportation of raw materials under high speed standards is generally used in mining, coal plants, chemical plants, metallurgical industry, engineering construction, seaports and other units.

Nylon conveyor belts are generally used in mining, coal plants, chemical plants, metallurgical industry, engineering construction, seaports and other units. Nylon conveyor belt is suitable for transporting non-corrosive non-corroding small pieces, granules, powders, various raw materials such as coal, coke, sand, concrete and other bulk materials (materials) or finished goods at normal temperature. Various raw materials such as small pieces, granules, powders, etc. with apparent density of 6.5~2.5t/m3 can also be transported in bulk.

Our company also has EP Nylon Conveyor Belt for sale, please contact us.

As a Rubber Conveyor Belts Manufacturer, share with you. With the popularization of conveyor belts in industrial production, various types, excellent performance, light weight, intelligence, and long life are good aspects that manufacturers care about. In industrial production, the proper application of conveyor belts seems to be especially critical. The application of conveyor belts should pay attention to the following matters:

1. Prevent the buffer roller from being covered by the raw materials, causing insensitive rotation, avoiding the overflow material caught between the drum and the tape, pay attention to the moistening of part of the conveyor belt theme activities, but not oily conveyor belt;

2. Avoid starting of conveyor belt load;

3. The deviation of the direction of the conveyor belt should be corrected immediately and effectively;

4. When it is found that the conveyor belt is partially damaged, use artificial cotton fabric to repair it immediately to prevent expansion;

5. Prevent the conveyor belt from being obstructed by the sound card frame, support or small pieces of raw materials, and avoid scratching and tearing.

Rubber Conveyor Belts

What problems should be paid attention to when storing conveyor belts?

1. The conveyor belt should be kept clean and tidy during transportation and storage to prevent natural light exposure, rain and snow weather, and avoid contact with acids, alkalis, raw oil, solvents and other chemical substances that damage the quality of elastomer materials, and the distance The hot mechanical equipment is one meter away.

2. The relationship between the diameter of the transmission drum of the transportation aircraft and the cloth layer of the conveyor belt, the public service facilities of the gear transmission roller and the redirection drum, and the provision of the buffer angle of the buffer roller of the cache file should be based on the design plan requirements of the belt conveyor. Effective selection.

3. During storage, the temperature in the warehouse should be maintained between -15°C and +40°C, and the air humidity should be maintained between 50-80%. Conveyor belts in storage must be stacked into rolls and placed without expansion joints. The storage time should be rotated once a quarter.

4. The operating speed of the conveyor belt should not exceed 0.5 meters per second. The raw materials with large block size and large abrasion and the fixed application will not change the pear-shaped feeding machinery and equipment. As far as possible, low-speed gears should be used. When the required speed of the adhesive tape is exceeded, the service life of the adhesive tape will be damaged.

5. In order to alleviate the destructiveness and damage of the raw material to the adhesive tape, the orientation of the feeder should be in accordance with the operating direction of the adhesive tape; the fluctuation of the raw material falling into the adhesive tape sand nest should be reduced as much as possible; the feeder mouth should bypass the drum or cache Above the file buffer buffer roller; the tape receiving section should reduce the buffer file buffer roller interval and adopt cache file precautions.

Our company also has Rubber Conveyor Belts for sale, please contact us.

As a Steel Cord Conveyor Belt Factory, share with you. Anti-static is very important in many types of conveyor belts. To some extent, anti-static conveyor belts can also be attributed to a complicated technicality. Conveyor belts have anti-static properties, can it immediately jeopardize the adaptability of the conveyor belt to the natural environment, anti-static conveyor belts, anti-static conveyor belts are completely different in the workplace. Second, anti-static conveyor belts can even jeopardize the safety of the workplace. Generally, anti-static conveyor belts are used, and their safety factor is guaranteed to be high, which is not easy to affect the natural environment.

Anti-Tear Conveyor Belt

Static phenomenon will occur in our daily life, everyone’s hair, clothes and pants, these. It may cause static induction in dry conditions. But in addition, static induction has the risk of “fuses” in some areas, such as the natural environment of industrial production with higher temperatures, or the raw materials of a small flame cannot be considered. These also reflect the necessity of anti-static conveyor belts in such places.

1. Conveyor Belts should be kept clean and tidy during transportation and storage to prevent natural light exposure, rain and snow weather, avoid contact with acids, alkalis, raw oil, solvents and other chemicals that damage the quality of elastomer materials, and the distance between them is hot mechanical equipment is one meter away.

2. The relationship between the diameter of the transmission drum of the transport aircraft and the cloth layer of the conveyor belt, the public service facilities of the gear transmission roller and the redirecting drum, and the provision of the buffer angle of the buffer roller of the cache file should be based on the design plan requirements of the belt conveyor. Effective selection.

3. During storage, the temperature in the warehouse should be maintained between -15℃ and +40℃, and the air humidity should be maintained between 50-80%. Conveyor belts in storage must be stacked into rolls and placed without expansion joints. The storage time should be rotated once a quarter.

4. The operating speed of the conveyor belt should not exceed 0.5 meters per second. The raw materials with large block size and large abrasion and the fixed application will not change the pear-shaped feeding machinery and equipment. As far as possible, low-speed gears should be used. When the required speed of the adhesive tape is exceeded, the service life of the adhesive tape will be damaged.

5. In order to alleviate the destructiveness and damage of the raw material to the adhesive tape, the orientation of the feeder should follow the operation direction of the adhesive tape; the undulation of the raw material falling into the adhesive tape sand nest should be reduced as much as possible; the mouth of the feeder should bypass the drum or cache Above the file buffer buffer roller; the tape receiving section should reduce the buffer file buffer roller interval and adopt cache file precautions.

Our company also has Anti-Tear Conveyor Belt for sale, please contact us.