分类： 未分类

Steel Cord Conveyor Belt General Use

Steel Cord Conveyor Belt, Coal Mine Steel Cord conveyor Belt, Metallurgy Steel Cord Conveyor Belt Manufacturer

  1. Applications

Steel cord conveyor belt for general use is widely used in coal, mine, port, metallurgy, power, chemical industries and suitable for high strength,long distance and heavy load transportation of materials.

 

  1. Physical Properties of Rubber Cover (before aging)
Grade Tensile Strength/Mpa ≥ Breaking Elongation/% ≥ Abrasion Loss/mm3 ≤
H 24 450 120
D 18 400 100
L 15 350 200
Note:Grade H-used for transporting sharp, abrasive materials which can damage belts badly.Grade D-used for transporting highly abrasive materials.Grade L-used for transporting medium-abrasion materials.

 

After-aging properties of rubber cover(70℃×7d):

Tensile strength and breaking elongation are both not lower than 75% of before-aging values.

 

  1. Adhesion
  2. Adhesion between rubber cover and belt core: ≥12N/mm.
  3. Adhesion of steel core (N/mm)

 

Belt type 630 800 1000 1250 1600 2000 2500 2800 3150 3500 4000 4500 5000 5400
Before- aging, ≥ 60 67.5 75 82.5 90 105 123 123 136.5 144 148.5 160.5 178.5 184.5
After- aging, ≥ 50 57.5 65 72.5 80 95 113 113 126.5 134 138.5 150.5 168.5 174.5

 

  1. Specification

Specification of steel cord conveyor belt

Belt type ST630 ST800 ST1000 ST1250 ST1600 ST2000 ST2500 ST2800 ST3150 ST3500 ST4000 ST4500 ST5000 ST5400
Min. tensile strength (N/mm) 630 800 1000 1250 1600 2000 2500 2800 3150 3500 4000 4500 5000 5400
Max. diameter of steel cord (mm) 3.0 3.5 4.0 4.5 5.0 6.0 7.2 7.2 8.1 8.6 8.9 9.7 10.9 11.3
Min. breaking force of steel cord (kN) 7.0 8.9 12.9 16.1 20.6 25.6 40.0 39.6 50.5 56.0 63.5 76.3 91.0 98.2
Steel cord pitch (mm) 10.0 10.0 12.0 12.0 12.0 12.0 15.0 13.5 15.0 15.0 15.0 16.0 17.0 17.0
Min. Top/Bottom cover thickness (mm) 4.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 5.5 6.0 6.5 7.0 7.5 8.0
Belt width Number of steel cord
650 60 60 51 51 51 52 41 46 41 41 41 39 36 N/A
800 75 75 63 63 63 63 50 57 50 50 51 48 45 45
1000 95 95 79 79 79 79 64 71 64 64 64 59 55 55
1200 113 113 94 94 94 94 76 85 76 77 77 71 66 66
1400 133 133 111 111 111 111 89 99 89 90 90 84 78 78
1600 151 151 126 126 126 126 101 114 101 104 104 96 90 90
1800 171 171 143 143 143 143 114 128 114 117 117 109 102 102
2000 191 191 159 159 159 159 128 143 128 130 130 121 113 113
2200 211 211 176 176 176 176 141 158 141 144 144 134 125 125
Note: N/A (not available), because of troughability.

 

Steel Cord Conveyor Belt, Anti-Tear Steel Cord conveyor Belt, Bucket Elevator Conveyor Belt Factory15-2.jpg

Anti-Abrasive Conveyor Belt

Anti-Tear Conveyor Bel, Rubber Conveyor Belts, Metallurgy Conveyor Belt Manufacturer

  1. Applications

Anti-abrasive conveyor belt is suitable for transporting lump, granular, powdery and highly abrasive materials in normal working conditions. It is widely used in metallurgy, construction materials, wharf, mining industries.

 

  1. Physical Properties of Rubber Cover (before aging)
Grade Tensile Strength/Mpa ≥ Breaking Elongation/% ≥ Abrasion Loss/mm3 ≤
H 24 450 120
D 18 400 100
L 15 350 200
Note:Grade H-used for transporting sharp, abrasive materials which can damage belts badly.Grade D-used for transporting highly abrasive materials.Grade L-used for transporting medium-abrasion materials.

After-aging properties of rubber cover(70℃, 7days):

Tensile strength and breaking elongation are both not lower than 75% of before-aging values.

 

  1. Full-thickness Tensile Properties

a、Longitudinal tensile strength, not less than the below table. (N/mm)

 

Nominal belt type 160 200 250 315 400 500 630
800 1000 1250 1600 2000 2500 3150
  1. Full thickness, longitudinal elongation at reference force, not more than 4%。

 

  1. Ply adhesion：
Item Ply to ply Rubber cover to ply
Rubber cover thickness ≤1.5mm Rubber cover thickness >1.5mm
All samples average value/ (N/mm) ≥ 4.5 3.2 3.5
All samples min peak value/ (N/mm) ≥ 3.9 2.4 2.9
Note: All samples max peak value is not more than 20N/mm.
  1. Straightness not more than 25mm

Huayue started business by producing rubber belts since 1982. It has been one of Solid Woven Conveyor Belts manufacturers and is the major factory of fabric conveyor belt and Steel Cord Conveyor Belt in China.

14.jpg

Cold & Fire Resistant Fabric Conveyor Belt

Fire Resistant Steel Cord Belt, Cold Resistant Conveyor Belt, EP Nylon Conveyor Belt Wholesaler

  1. Applications

Cold & fire resistant conveyor belt is suitable for transporting flammable and explosive materials in outdoor freezing area. Its covers are made of NR and BR. Its canvases are made of EP, nylon, cotton.

 

  1. Physical Properties of Rubber Cover
Item Index
H D L
Tensile strength/ Mpa ≥ 24.0 18.0 15.0
Breaking elongation/ % ≥ 450 400 350
Aging test (70℃, 7d) Change rate of tensile strength/ % ±25 ±25 ±25
Change rate of breaking elongation/ % ±25 ±25 ±25
Abrasion loss/ mm3 ≤ 120 100 200
Cold resistant coefficient at elongation ≥ C1 (-45℃) 0.3
C2 (-50℃) 0.2
Note: C1-working temperature: -45℃~+50℃.C2-working temperature: -60℃~+50℃.

Huayue started business by producing rubber belts since 1982. It has been one of Solid Woven Conveyor Belts manufacturers and is the major factory of fabric conveyor belt and Steel Cord Conveyor Belt in China.13-2.jpg

Heat & Acid-alkali Resistant Conveyor Belt

Heat Resistant Conveyor Belt, Acid-alkali Resistant Conveyor Belt, Chemical Resistant Fabric Conveyor Belt Manufacturer

Heat & acid-alkali resistant conveyor belt is normally used for transporting heat & acid-alkali materials.

Wear resistant fabric conveyor belts for the transport of heavy abrasive materials. The quality of our Fire Resistant Conveyor Belt is guaranteed. We are Cotton Conveyor Belt Wholesaler. If you don’t understand anything, you can contact us.12-1.JPG

Anti-Tear Conveyor Belt

Anti-Tear Conveyor Belt, Anti-Tear Steel Cord Conveyor Belt, Metallurgy Steel Cord Conveyor Belt Manufacturer

Anti-tear conveyor belts is normally used for transporting heavy and sharp materials. The belt is used in industries of mines, ports, power, metallurgy, chemical industry, coal mine, etc.

We place transverse, high tension textile rope or fabric as strengthened layers inside top/bottom cover of belt.

Wear resistant fabric conveyor belts for the transport of heavy abrasive materials. The quality of our Fire Resistant Conveyor Belt is guaranteed. We are Cotton Conveyor Belt Wholesaler. If you don’t understand anything, you can contact us.11.jpg

Steep Angle Sidewall Conveyor Belt

Steep Angle Sidewall Conveyor Belt

Steep Angle Sidewall Conveyor Belt, Nylon Conveyor Belt, Rubber Conveyor Belts Manufacturer

  1. Applications

Steep Angle Sidewall Conveyor Belt is normally used for transportation at angle up to 90 degree. It also used together with belt conveyor for horizontal & short-distance transportation. (no cleats the moment)

The belt is twice vulcanized through base belt (trough degree≤0.03), sidewall, cleat (no cleat needed when horizontal transportation).

10-1

  1. Structure

Sidewall conveyor belt consists of base belt, sidewalls and cleats. There are usually transverse steel wire reinforcement inside top & bottom covers of the base belt.

 

  1. Sidewall conveyor belt specification
Belt width (mm) Sidewall height (mm) Cleat height (mm) Effective belt width (mm)
400 60 –
80 70
100 90
120 100
500 60 250
80 70
100 90
120 110
160 140
650 60 250, 300, 350
80 70
100 90
120 110
160 140
200 180
800 60 350, 410, 460
80 70
100 90
120 110
160 140
200 180
240 220
1000 60 460, 550, 640, 690,
80 70
100 90
120 110
160 140
200 180
240 220
300 270
1200 60 460, 550, 640, 690
80 70
100 90
120 110
160 140
200 180
240 220
300 270

 

Rubber Belt, Fabric Conveyor Belt, Steel Cord Conveyor Belt, Solid Woven Conveyor Belt Manufacturer.

Sidewall Conveyor Belt

Sidewall Conveyor Belt

Sidewall Conveyor Belt, Sidewall Rubber Conveyor Belt, Steep Angle Sidewall Conveyor Belt Manufacturer

  1. Applications

There are no cleats on sidewall conveyor belt which is suitable for horizontal, short-distance transportation. (no cleats at the moment)

9

  1. Structure

It consists of two parts:

-Base belt: high tensile strength, high abrasion resistant , good transverse stiffness and good lengthways flexibility.

-Sidewall: high tensile strength, hot vulcanization with base belt, height up to 40-80mm, fabric reinforcement built in sidewall.

 

  1. Sidewall conveyor belt specification
Belt width (mm) Sidewall height (mm) Cleat height (mm) Effective belt width (mm)
400 60 –
80 70
100 90
120 100
500 60 250
80 70
100 90
120 110
160 140
650 60 250, 300, 350
80 70
100 90
120 110
160 140
200 180
800 60 350, 410, 460
80 70
100 90
120 110
160 140
200 180
240 220
1000 60 460, 550, 640, 690,
80 70
100 90
120 110
160 140
200 180
240 220
300 270
1200 60 460, 550, 640, 690
80 70
100 90
120 110
160 140
200 180
240 220
300 270

Huayue started business by producing rubber belts since 1982. It has been one of Solid Woven Convey or Belts manufacturers and is the major factory of fabric conveyor belt and Steel Cord Conveyor Belt in China.

Pattern Conveyor Belt (Chevron Conveyor Belt)

Pattern Conveyor Belt (Chevron Conveyor Belt)

Pattern Conveyor Belt, Chevron Conveyor Belt, Ep 400 3 Conveyor Belt Wholesaler

  1. Applications

Pattern conveyor belt (chevron conveyor belt) is suitable for transporting powdery, granular and little lump materials at angle 0~40 degree. Pattern shape can be made as per clients’ requirement with different pattern height.

8

  1. Physical properties of rubber cover (before aging)
Grade Tensile Strength/Mpa ≥ Breaking Elongation/% ≥ Abrasion Loss/mm3 ≤
H 24 450 120
D 18 400 100
L 15 350 200

 

  1. Ply adhesion
Item Ply to ply Rubber cover to ply
Rubber cover thickness ≤1.5mm Rubber cover thickness >1.5mm
All samples average value/ (N/mm) ≥ 4.5 3.2 3.5
All samples min peak value/ (N/mm) ≥ 3.9 2.4 2.9

Huayue started business by producing rubber belts since 1982. It has been one of Solid Woven Convey or Belts manufacturers and is the major factory of fabric conveyor belt and Steel Cord Conveyor Belt in China.

Cotton Conveyor Belt

Cotton Conveyor Belt

Cotton Conveyor Belt, Solid Woven Conveyor Belt, ep 400 3 Conveyor Belt Wholesaler

  1. Applications

Cotton conveyor belt is suitable for transportation of short-distance, medium quantity.

7

  1. Physical properties of rubber cover (before aging)
Grade Tensile Strength/Mpa ≥ Breaking Elongation/% ≥ Abrasion Loss/mm3 ≤
H 24 450 120
D 18 400 100
L 15 350 200
Note:Grade H-used for transporting sharp, abrasive materials which can damage belts badly.Grade D-used for transporting highly abrasive materials.Grade L-used for transporting medium-abrasion materials.

 

After-aging properties of rubber cover(70℃, 7days):

Tensile strength and breaking elongation are both not lower than 75% of before-aging values.

 

  1. Ply adhesion
Item Ply to ply Rubber cover to ply
Rubber cover thickness ≤1.5mm Rubber cover thickness >1.5mm
All samples average value/ (N/mm) ≥ 3.2 2.1 2.7
All samples min peak value/ (N/mm) ≥ 2.7 1.6 2.2
Note: All samples max peak value is not more than 20N/mm.

 

Huayue started business by producing rubber belts since 1982. It has been one of Solid Woven Conveyor Belts manufacturers and is the major factory of fabric conveyor belt and Steel Cord Conveyor Belt in China.

Chemical Resistant Fabric Conveyor Belt

Chemical Resistant Fabric Conveyor Belt

Rubber Conveyor Belts, Chemical Resistant Fabric Conveyor Belt, Acid-alkali Resistant Conveyor Belt Supplier6

  1. Applications

Chemical Resistant Fabric Conveyor Belt, (i.e. acid/alkali resistant conveyor belt) is suitable for such acid-alkali working conditions as paper mill, phosphate fertilizer, sea salt industries.

 

  1. Physical properties of rubber cover
  2. Physical properties of rubber cover (aging test, 70℃×96h)
Item Tensile strength/Mpa ≥ Breaking elongation/% ≥ Abrasion loss/mm3 ≤ Hardness/(°)+10/-5
Before aging 14.0 400 250 60
After aging 12.0 340 – 65

 

  1. Acid-alkali resistant properties of rubber cover
Class Soak liquid Concentration Soak conditions(℃×h) Change rate of properties before and after soaking
Volume expansion rate Change rate of tensile strength
A1 Hydrochloric acid (HCl) 18% 50℃×96h ≤+10% ≥-10%
A2 Sulfuric acid(H2SO4) 50% 50℃×96h ≤+10% ≥-10%
A3 Sodium hydroxide(NaOH) 48% 50℃×96h ≤+10% ≥-10%

 

Wear resistant fabric conveyor belts for the transport of heavy abrasive materials. The quality of our Fire Resistant Conveyor Belt is guaranteed. We are Cotton Conveyor Belt Wholesaler. If you don’t understand anything, you can contact us.